Manualshelf

BladeCluster Solution Manual

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series
71727374757677787980
Hardware Prod Type
is the hardware product type for the modules that connect the node to the BladeCluster fabrics.
Cluster Topo Type
is the cluster topology type for the modules that connect the node to the BladeCluster fabrics.
BladeCluster
indicates if the local node is configured for connectivity to a BladeCluster.
BladeCluster/67x0
indicates if the local node is configured for connectivity to a combined BladeCluster/6770 or
BladeCluster/6780 topology.
Long-Haul
indicates if the local node is configured for connectivity to long-haul BladeCluster zone-to-zone
links.
Node Function
indicates if the local node is an anchor node or a non-anchor node.
SvNet Node Number
is the ServerNet node number of the local node.
Node Routing ID
is the ServerNet node routing ID assigned to the local node.
Position in Zone
is the position of the node within its BladeCluster zone.
Zone Number
is the zone number that contains the local node.
This Zone's Anchor
is the ServerNet node number of the anchor node in the same BladeCluster zone that contains the
local node.
Max Num of Zones
is the maximum number of zones supported by the configured BladeCluster topology.
Group Number
is the group number of the modules that connect the node to the BladeCluster fabrics.
Module Number
is the module number of the modules that connect the node to the BladeCluster fabrics.
Slot Number
is the slot number of the modules that connect the node to the BladeCluster fabrics.
Module Status
is the status of the modules that connect the node to the BladeCluster fabrics.
BladeCluster Solution License Files
lists the BladeCluster license files in use by the $ZZSCL process in the local node.
Checking the Internal ServerNet X and Y Fabrics
If a problem occurs on an internal fabric on any node in the BladeCluster, refer to the OSM online
help for instructions on how to check the internal fabrics, or refer to the SCF STATUS SERVERNET
$ZSNET command in the SCF Reference Manual for the Kernel Subsystem.
Checking the Internal ServerNet X and Y Fabrics 73