BladeCluster Solution Manual

IMPORTANT: TOUS LES RECIPIENTS SONT DESTINES UNIQUEMENT A UN USAGE INTERNE.
VORSICHT: ALLE STECKDOSEN DIENEN NUR DEM INTERNEN GEBRAUCH.
HIGH LEAKAGE CURRENT
To reduce the risk of electric shock due to high leakage currents, a reliable grounded (earthed)
connection should be checked before servicing the power distribution unit (PDU).
Observe the following limits when connecting the product to AC power distribution devices: For
PDUs that have attached AC power cords or are directly wired to the building power, the total
combined leakage current should not exceed 5 percent of the rated input current for the device.
“HIGH LEAKAGE CURRENT, EARTH CONNECTION ESSENTIAL BEFORE CONNECTING SUPPLY”
“HOHER ABLEITSTROM. VOR INBETRIEBNAHME UNBEDINGT ERDUNGSVERBINDUNG
HERSTELLEN”
“COURANT DE FUITE E’LEVE’. RACCORDEMENT A LA TERRE INDISPENSABLE AVANT LE
RACCORDEMENT AU RESEAU”
FUSE REPLACEMENT
CAUTION – For continued protection against risk of fire, replace fuses only with fuses of the same
type and the same rating. Disconnect power before changing fuses.
Waste Electrical and Electronic Equipment (WEEE)
Information about the Waste Electrical and Electronic Equipment (WEEE) directive is available
from the HP Technical Library at http://docs.hp.com:
• Under NonStop Technical Library, select Safety and Compliance > Waste Electrical and
Electronic Equipment (WEEE). Select the language you prefer.
Important Safety Information
Safety information is available from the HP Technical Library at http://docs.hp.com:
• Under NonStop Technical Library, select Safety and Compliance > Important Safety Information.
Select the language you prefer.
Table of Toxic and Hazardous Substances/Elements and Their Contents
(as required by China’s Management Methods for Controlling Pollution by Electronic Products)
97