CORBA 2.6.1 Administration Guide

Specifies whether or not Parallel Library TCP/IP is enabled for Comm Servers.
pathmon
The name of the PATHMON process used for the NonStop Services for CORBA processes.
product_dir_guardian
The Guardian directory in which the product files were installed.
product_dir_oss
The OSS directory in which the product files were installed.
ssliop_default
The location for the default certificates. The default at installation is $NSD_ROOT/ssliop/default. If no certificate file is configured,
ssliop_defaultin default@ORB is used to find the location.
stack_size
Used for C++ applications only. Defines how many bytes are allocated for new thread stacks. The default is 65536, the minimum is
16384, and the maximum is 32768000.
tcp_process
The default TCP process (used when none is explicitly specified).
trace_file
The location to which trace output is written. Use <STDOUT> to cause trace messages to appear on the terminal (standard output). Use a
file name to cause trace messages to be written to the file.
url_path
The OSS pathname under which IOR, corbaloc, and corbaname URL object references are stored.
default@trace
The complete list of trace settings is shown in Chapter 5, Tracing and Debugging Applications, of the NonStop CORBA 2.6.1 Programmer's
Guide for C++ and the NonStop CORBA 2.6.1 Programmer's Guide for Java.
event_service@event_service_settings
EventServiceID
Specifies the name under which the Event Service is registered in the Naming Service.
EventServiceFactory
If set to true, specifies that the Event Service creates an Event Service factory object at initialization; otherwise, an Event Service
channel object is created at initialization.
EventServiceIORFile
If present, specifies the filename to which the Event Service object reference is stored.
event_service@ORB
tcp_process
The TCP process associated with host_name. The default is $ZTC0. The default TCP process name for Parallel Library TCP/IP is set
when Parallel Library TCP/IP is installed. You can locate the Parallel Library TCP/IP process for your system by using the SCF command
LISTDEV TCPIP and looking for a process with program path ending in TCPSAM.
port_number
The port number used by the Event Service.
tcp_server
Sets the IIOP protocol.
host_name
The address used by the Event Server.
ilsd1@ORB
host_name
The address used by the ILSD.
parallel_ip
Specifies whether or not Parallel Library TCP/IP is enabled.
port_number
Specifies the port number that the ILSD listens on. At installation, this port number is set to $portnumber3 (where $portnumber0 is the
number you specify for TCP/IP). If you have more than one copy of NonStop CORBA installed on a NonStop server, each copy must
have a different ILSD port number.
tcp_process
The TCP process associated with host_name. The default is $ZTC0. The default TCP process name for Parallel Library TCP/IP is set
when Parallel Library TCP/IP is installed. You can locate the Parallel Library TCP/IP process for your system by using the SCF command
LISTDEV TCPIP and looking for a process with program path ending in TCPSAM.
tcp_server
Sets the IIOP protocol.