CORBA 2.6.1 Getting Started Guide for C++

Modifying an Existing NonStop CORBA 2.6.1 Installation to Add the
IIOP/SSL features
If you previously installed NonStop CORBA 2.6.1, but did not install the optional IIOP/SSL features, you can add those features. To check
whether IIOP/SSL is already installed, run the
stack sample program configured for IIOP/SSL as described in Using the Stack Example with
IIOP/SSL
Installing IIOP/SSL on an Existing NonStop CORBA 2.6.1 System
1. If CORBA is running, stop it by using the Console or the nsdstop script.
2. Run the NonStop CORBA OSS Installer GUI or the
install script, just as you did for the initial installation of NonStop CORBA 2.6.1. If
you are running the installer only to add the IIOP/SSL features, choose to:
Uncheck the NEW Installation box
Uncheck the Unpax Runtime pax file box
Leave the Unpax SDK pax file box unchecked
Check the Install SSLIOP box
Uncheck the Rebuild JVM box
Leave the Stop Admin Server box checked.
3. Click Next to continue, and follow the prompts to complete the installation.
4. Verify that IIOP/SSL is installed by running the
stack sample program configured for IIOP/SSL as described in Using the Stack Example
with IIOP/SSL.
Alternative Installation Method
You may choose to install NonStop CORBA on the NonStop system by using the Open System Services (OSS) shell prompt. Before starting the
installation be sure to follow the instructions given in
Before You Begin the Installation and have run the IPSetup utility as described in Run the
IPSetup Program. Optionally, you may have run the DSM/SCM planner interface as mentioned in Run the DSM/SCM Planner Interface. To use
the alternative method, you run the install script.