CORBA 2.6.1 Getting Started Guide for C++

Collector Process
Specifies the EMS collector process used by the subsystem. The name
is defined in NonStop Kernel format (for example, $ZNSD0).
ENTER the Collector process you want to use or leave blank to use
the current value $0:
EMS template directory
The location of the system file TEMPLATE is required for configuring
and creating the template files. If you have multiple copies of this
file you should use the one that is open.
ENTER either a new Guardian location or leave blank to use the
current value /G/SYSTEM/SYS00 :
EMS object template directory
The destination location for EMS TEMPLATE object files is required
for configuring and creating the new template files.
ENTER either a new Guardian location or leave blank to use the
current value /G/SYSTEM/ZTEMPL :
Host name of machine
The Name of host machine on which product runs. You can use either the
symbolic name, the actual IP address, or the full symbolic name of the host.
ENTER host name here
value : <change_me>
Where,
change_me is a dot-separated IPv4 address like 172.31.41.151 or
colon-separated IPv6 address like fe80::a00:8eff:fe06:d093.
TCP process name
Specifies the TCP process name.
ENTER the TCP process name here or leave blank to use the
current value $ZTC0 :
=== CHECKING for existing process $ZTC0 ===
TCP/IP base port number
The port number you specify here and the next three sequential ports
will be allocated for the subsystem.
ENTER base port number or leave blank to use the current
value 4000 :
Security domain
Specifies the security domain name.
ENTER security domain
value USER.NSDOMS:
Business domain
Specifies the business domain name.
ENTER business domain
value : bus
Do you want to build EMS templates (y/n) [default Y] ?:
Rebuild JVM (y/n) [default Y] ?:
CURRENT SETTINGS
Guardian root directory : /G/system/zorbsdk
Java OSS root directory : /usr/tandem/java
OSS root directory : /usr/tandem/nsdoms
Admin dB root directory : /G/SYSTEM/MASTER
PAX file : G/SYSTEM/ZOSSUTL/T2818PAX
RT PAX file : G/SYSTEM/ZOSSUTL/T2817PAX
SSLIOP PAX file : G/SYSTEM/ZOSSUTL/T2820PAX
Environment prefix : Z
EMS collector : $0
EMS template directory : /G/SYSTEM/SYS00
EMS template object dir: /G/SYSTEM/ZTEMPL
OSS host name : <change_me>
TCP process name : $ZTC0
TCP/IP base port number : 4000
Security domain : USER.NSDOMS
Business domain : bus
starting to unpack files
USTAR format archive
list of unpaxed files
updating installed files
building config dB
initializing LSD
initializing Name Service
building EMS templates (in background)
check /usr/tandem/nsdoms/log/bldems.out for details
updating JVM
starting Admin server
Where,
change_me is a dot-separated IPv4 address like 172.31.41.151 or
colon-separated IPv6 address like fe80::a00:8eff:fe06:d093.
==================================================
NonStop(TM) CORBA INSTALLATION COMPLETE