CORBA 2.6.1 Readme

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series

NonStop_CORBA_2.6.1_R eadme.txt

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name:

NonStop(TM) CORBA(R) 2.6.1

Marketing ID:

SE65V3 SE66V3

Component Products:

T2817C11 NonStop CORBA 2.6.1 RTK

T2818C11 NonStop CORBA 2.6.1 SDK

T2820C11 SSL for NonStop CORBA 2.6.1

I. Basic Product Installation Instructions

1. Ensure that the requirements for using this product are met

(see Section IV Product Requirements below).

It is critically important that you ensure that you have the

prerequisite software.

2. Verify that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Install the NonStop CORBA 2.6.1 documentation

(on workstation).

Execute the file CD_DOCS\CORBADOC.EXE on your CD by double

clicking on it in Windows Explorer. You will be prompted for

a directory where you want to place the files. To view the

documentation, open the home.htm file in a Web browser by double

clicking on it in Windows Explorer.

4. Install the NonStop Distributed Component Console

(on workstation).

Execute the file WS_SW\NSDCONSOLE.EXE on your CD by double

clicking on it in Windows Explorer. You will be prompted for

a directory where you want to place the files. The default

directory is "C:\NSDConsole". If you want to enter a different

directory name, do so and continue. You will end up with the

following directory structure (<nsdconsole-dir> is the directory

in which you installed the console):

<nsdconsole-dir>

+--jre

+--lib

5. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You will need Adobe Acrobat

Reader to read or print the IPSetup User Guide. Visit Adobe's

website to download the latest Adobe Acrobat Reader:

http://www.adobe.com

6. Use one of the following methods to move/copy files to the

Installation Subvolumes: (A) IPSetup only, or (B) IPSetup in

conjunction with DSM/SCM.

Page 1

Summary of content (9 pages)

PAGE 1
NonStop_CORBA_2.6.1_R eadme.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2004 HP Computer Corporation Product Name: NonStop(TM) CORBA(R) 2.6.1 Marketing ID: SE65V3 SE66V3 Component Products: T2817C11 NonStop CORBA 2.6.1 RTK T2818C11 NonStop CORBA 2.6.1 SDK T2820C11 SSL for NonStop CORBA 2.6.1 I. Basic Product Installation Instructions 1. Ensure that the requirements for using this product are met (see Section IV Product Requirements below).
PAGE 2
NonStop_CORBA_2.6.1_R eadme.txt 7. Follow the Pre-Installation Instructions in Section II below, if any, before continuing to Step 8. 8. Run IPSetup to place and install (move NonStop Kernel files to the correct ISVs) this product. If TCP/IP and FTP are unavailable, or if you have problems with automatic file placement, use the instructions in the IPSetup User Guide section "Manual Software Placement Using the IPSetup TACL Program" to manually place NonStop Kernel files.
PAGE 3
NonStop_CORBA_2.6.1_R eadme.txt (ftp command) the files from the workstation to the NonStop system. This failure occurs in a typical situation when you install the product using the super.super ID and for common security reasons, the super.super ID is forbidden ftp access. III. Post-Installation Instructions 1. If you did not install the EMS template files using DSM/SCM, invoke the INSTALL^TEMPLATES TACL macro to install the ZDOMTMPL EMS template files contained on the CD.
PAGE 4
NonStop_CORBA_2.6.1_R eadme.txt For example, if the "Working subvolume", $DATA01.C11NPV is selected, the product installation DSV for NonStop CORBA 2.6.1 SDK will be $DATA01.R2818C11. NOTE: In the case of a non default installation, the ISV chosen for all components MUST be the same.
PAGE 5
NonStop_CORBA_2.6.1_R eadme.txt the transaction service. log Contains log files which are initially empty. origetc Contains the original etc.sh file and data base files. samples Top directory for C++ samples. ssliop Contains the SSL specific directories including a subdirectory containing SSL samples. urls Contains IOR files. /G/vol/subvol Contains the NonStop CORBA files that reside on the Guardian file system, such as the EMS template files.
PAGE 6
NonStop_CORBA_2.6.1_R eadme.
PAGE 7
NonStop_CORBA_2.6.1_R eadme.txt files. NSK_SW Subdirectory containing NonStop Kernel component files, including installation utilities and instructions. SOFTDOCS Subdirectory containing all Product Version softdocs. WS_SW Subdirectory containing workstation component files. INSTALL_CORBA.EXE: Self-extracting workstation-based installer for NonStop CORBA 2.6.1 This installer will install RTK, SDK, and/or SSLIOP. JORBLITE.EXE: Self-extracting JORB Lite. NSDCONSOLE.
PAGE 8
NonStop_CORBA_2.6.1_R eadme.txt 2. Unzip the following documentation zip files in the same directory that they reside in: \docs\javapubs\javadocs\javadoc.zip You can use an application like "WinZip" to do this. 3. You will need to obtain a "C" preprocessor, such as "cl" from Microsoft's Visual C++ (needed by IDL compiler). You will also need to ensure that the "cl.exe" program is accessible from the PATH environment variable. The idl2java script executes IDL using the "cl.
PAGE 9
NonStop_CORBA_2.6.1_R eadme.txt 2. Copy the VSEP.BAT and VSEP.ZIP files from the WS_SW directory on NonStop CORBA 2.6.1 CD to the on your workstation. 3. Ensure that your PATH environment variable includes the location of both the WINZIP32.EXE and REGEDIT.EXE programs. 4. Execute the VSEP.BAT file which will unzip the files into a number of directories below the . Once the files have been unzipped the VSEP.