dba/m Database Manager 7.1 Installation and Operations Manual

Table 2-2. Final Installation-Macro Prompts.
PROMPT SAMPLE
RESPONSE
>Enter IP address for NonStop System (Default:0.0.0.0)
This entry is required only for native TCP/IP option and NOT
for RSC option.
Enter IP address of
your NSK server.
>Enter Base Socket Port Address(Default:3000)
This entry is required only for native TCP/IP option and NOT
for RSC option.
<cr>
>Enter Base Socket Port Address (Default: 3100) for Monitor
Utility.
This entry is required only for native TCP/IP option and NOT for
RSC option
<cr>
>Enter dba/m Database Manager Pathway Name(Default $GDB):
The pathway name must match PATHMON_NAME defined on
the client.
<cr>
>Enter Home Terminal Name for dba/m Database Manager
Pathway Server(Default $ZHOME):
dba/m Database Manager requires that the home terminal must
exist as an active terminal in a paused state. For ‘S’ Series
Systems, specify Home Terminal as $ZHOME.
<cr>
>Enter dba/m Database Manager Pathmon’s Primary
CPU(Default 1):
<cr>
>Enter dba/m Database Manager Pathmon’s Backup
CPU(Default 0):
<cr>
>Enter CPU A for dba/m Database Manager Servers (Default 1):
The CPU A number must be different from the CPU B number
and the CPU C number must be different from the CPU D
number. CPU C and D pairing can be the same as CPU A and B
pairing.
<cr>
>Enter CPU B for dba/m Database Manager Servers(Default 0): <cr>
>Enter CPU C for dba/m Database Manager Servers(Default 2): <cr>
>Enter CPU D for dba/m Database Manager Servers(Default 3): <cr>
>Enter Server Priority for dba/m Database Manager
Servers(Default 149)
<cr>
>Enter Pathmon Process Priority for dba/m Database Manager
Servers(Default 149)
<cr>
dba/m Database Manager V7.1 Installation and Operations Manual – 540155-001 9