DSM/SCM Quick Reference Guide

Configuring a Host or Physical Target System

DSM/SCM Quick Reference Guide—529847-005

1-6

Task 3: Configure the Target Database

You must run and log on to the target Maintenance Interface to perform this task.

Task 3.1: Update the Target Profile

For more information, see the

DSM/SCM User’s Guide

1. Select System Maintenance (selection 1); then press F1.

DSM/SCM displays the System Maintenance screen.

2. Enter the system name; then press F2.

3. Review the system information and change the default values, as needed.

4. Press Shift-F2 to enter any changes.

5. Press F16.

DSM/SCM returns to the Maintenance Interface main menu.

Task 3.2: Update Target Volume Usage

For more information, see the

DSM/SCM User’s Guide

1. Select Volume Maintenance (selection 2); then press F1.

DSM/SCM displays the Volume Maintenance screen.

2. Specify the volume usage.

3. Press Shift-F2 to enter the data.

4. Press F16 to return to the main menu.

Task 3.3: Add and Set Security for Operators

For more information, see the

DSM/SCM User’s Guide

1. Select Security Maintenance Menu (selection 3); then press F1.

DSM/SCM displays the Security Maintenance menu.

2. Select Operator Security Maintenance (selection 1); then press F1.

3. Follow the instructions on the Operator Security Maintenance screen to add

operators to DSM/SCM and to specify their permissions.

4. When all operators are added, press F16.

DSM/SCM returns to the Security Maintenance menu.