DSM/SCM Quick Reference Guide

Configuring a Host or Physical Target System
DSM/SCM Quick Reference Guide—529847-005
1-8
Task 5.1: Register the Target
Task 5.1: Register the Target
1. In the Configuration Revisions window, select the configuration name for the target.
For a new target, the name has the form:
\ system_name DEFAULT
2. Select Maintain>Target maintenance>Initialize target system.
3. Click Profile.
4. Enter a descriptive target name.
5. Select the Manage OSS Files check box if you will manage OSS files on this
target. If you are not managing OSS files, you must make sure that the box is
cleared.
Task 5.2: Set Target Output Defaults
1. Change the target output and system generation values if necessary.
a. Click Output....
DSM/SCM displays the Output Defaults dialog box.
b. Enter values in the data fields as needed.
c. Click OK.
DSM/SCM returns to the Target Information dialog box.
Task 5.3: Set Target System Generation Defaults
1. Change the target system generation values if necessary.
a. Click SYSGEN....
DSM/SCM displays the SYSGEN Defaults dialog box.
b. Enter values in the data fields as needed.
c. Click OK.
DSM/SCM returns to the Target Information dialog box.
2. Click OK in the Target Information dialog box.
DSM/SCM returns to the Configuration Revisions window.
Task 6: Receive Software
Task 6.1: Receive Software
1. Load the SUT onto the tape drive.