DSM/SCM Quick Reference Guide

Configuring a Host or Physical Target System
DSM/SCM Quick Reference Guide—529847-005
1-10
Task 7.3: Resolve Discrepancies
Task 7.3: Resolve Discrepancies
If you applied a full activation package instead of an initialization package, this task is
not necessary.
1. From the Initialize Target System dialog box, click Discrepancies....
DSM/SCM displays the Prepare Request dialog box.
2. Change the system name run-time parameter:
a. Select the parameter; then click Modify parameter....
b. On the Modify Parameter Value dialog box, enter the name of the configuration
in the Value field.
c. Click OK.
DSM/SCM returns to the Prepare Request dialog box.
d. Prepare the report for printing or online viewing; then click OK to submit the
Prepare Report request.
If there are no discrepancies:
DSM/SCM displays the No Software Discrepancies dialog box.
1. Click Yes to mark the system as initialized.
DSM/SCM displays the Initialized Target dialog box.
2. Click OK.
Initialization is now complete.
3. Select File>Exit.
DSM/SCM exits the Planner Interface.
Configuration of the host system and its logical target is now complete.
If there are discrepancies:
DSM/SCM displays the Software Discrepancies Found dialog box.
1. Create a discrepancy report:
a. Click Report request....
DSM/SCM displays the Prepare Report Request dialog box.
b. Select Discrepancy from the reports list.
c. Click Continue....
DSM/SCM displays the Prepare Report dialog box.
d. Change the system name run-time parameter.