DSM/SCM Quick Reference Guide

Updating a System’s Software Configuration
DSM/SCM Quick Reference Guide—529847-005
3-5
Task 4: Copy Products to the New Software Revision
3. Modify the list as necessary by copying products to the new software revision.
Task 4: Copy Products to the New Software Revision
1. Select software in the Software in Archive window.
2. Click Copy to.
Task 5: Change the Software Revision Notes
1. In the New Software Revision window, click Edit revision notes....
DSM/SCM displays the Revision Notes dialog box. The dialog box shows the notes
previously entered for the revision upon which the new one is based.
2. Enter text in the box.
3. Click OK.
Procedures 3 and 4: Build and Apply the
Configuration Revision
Task 1: Initiate the Build/Apply Request
In the New Software Revision window, click Build/Apply....
DSM/SCM displays the Build/Apply Request dialog box.
Task 2: Indicate a Build or Build/Apply Request
Indicate under Perform Steps whether this is a Build request or a Build, apply &
process snapshot request.
Task 3: Specify the SYSnn Subvolume
1. Click List SYSnn....
DSM/SCM displays a scrollable list of the SYS nn s currently in use.
2. Select a SYS nn ; then click OK.
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 4: Edit the Planner Instructions to Operator
1. Click Edit instructions....
DSM/SCM displays the Planner Instructions dialog box.
2. Change the text in the space provided; then click OK.