DSM/SCM Quick Reference Guide

Updating a System’s Software Configuration
DSM/SCM Quick Reference Guide—529847-005
3-6
Task 5: Schedule the Request
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 5: Schedule the Request
1. Click Scheduling....
DSM/SCM displays the Request Scheduling Options dialog box.
2. In the Build portion of the dialog box, schedule the Build.
3. In the Apply portion of the dialog box, schedule the Apply; then click OK.
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 6: Set Output Options
1. Click Output....
DSM/SCM displays the Output Options dialog box.
2. Change the information shown in the dialog box options as needed; then click OK.
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 7: Set the System Generation Options
1. Click SYSGEN....
DSM/SCM displays the SYSGEN Options dialog box.
2. Change the information shown on the dialog box as needed; then click OK.
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 8: Set Target Subvolume Locations
1. Click TSV Location....
DSM/SCM displays the TSV Locations dialog box.
2. Change the information shown in the dialog box as needed; then click OK.
DSM/SCM returns you to the Build/Apply Request dialog box.
Task 9: Set File Placement Options
1. Click File Placement....
DSM/SCM displays the File Placement Options dialog box.
2. Indicate where files are to be retrieved from, which files will be replaced, and which
files will be transferred to the target from the given options.
3. Click OK.