DSM/SCM Quick Reference Guide

DSM/SCM Quick Reference Guide—529847-005
4-1
4 Backing Out a Revision
This section describes backing a system out to its previous configuration revision:
For more information, see the DSM/SCM User’s Guide .
Backing Out If DSM/SCM Is Running
Task 1: Start DSM/SCM
1. Start TMF if it is not already running.
2. Start DSM/SCM if it is not already running.
Task 2: Start and Log On to the Target Interface
1. Start the Target Interface.
DSM/SCM displays the Target Interface Logon Menu.
2. Enter your password; then press F1.
DSM/SCM displays the Target Interface Main Menu.
Task 3: Perform Backout Activities
1. Enter 3 (Perform target activities) in the Selection number field; then press F1.
DSM/SCM displays the Target Menu - Select Target screen.
2. Enter the number corresponding to the name of the target system; then press F1.
DSM/SCM displays the Target Menu - Select Action screen.
3. Enter 2 (Perform backout to S/W) in the Selection number field; then press F1.
DSM/SCM displays the Backout - Verify Request screen.
4. Press F1 to submit the Backout request.
DSM/SCM displays the Backout-Processing Backout screen. The screen is
updated with current status approximately every 15 seconds.
•
While waiting for the request to finish, you can press F4 to view current EMS
messages related to the request.
Procedure Page
Backing Out If DSM/SCM Is Running 4-1
Backing Out If a Previous Configuration Does Not Exist or If DSM/SCM Does Not
Run
4-6
Backing Out After Renaming the SYSnn 4-6