DSM/SCM Quick Reference Guide

Contents
DSM/SCM Quick Reference Guide—529847-005
ii
1. Configuring a Host or Physical Target
System (continued)
1. Configuring a Host or Physical Target System (continued)
Task 5: Initialize the Target on the System 1-7
Task 5.1: Register the Target 1-8
Task 5.2: Set Target Output Defaults 1-8
Task 5.3: Set Target System Generation Defaults 1-8
Task 6: Receive Software 1-8
Task 6.1: Receive Software 1-8
Task 6.2: Create Software Revision 1-9
Task 7: Build/Apply Software Configuration 1-9
Task 7.1: Indicate Type of Build 1-9
Task 7.2: Receive the Target Snapshot Into the Host Database 1-9
Task 7.3: Resolve Discrepancies 1-10
2. Creating an Alternate System Volume and Adding and
Deleting Logical Targets
Creating an Alternate System Volume 2-1
Adding Additional Logical Targets 2-2
Deleting a Logical Target 2-3
3. Updating a System’s Software Configuration
Procedure 1: Receive the Software Into the Archive 3-1
Preliminary Task 1: Save the Existing Configuration Database 3-1
Preliminary Task 2: Log On to DSM/SCM 3-1
Task 1: Receive Software Into the Archive 3-1
Procedure 2: Create a New Software Revision 3-2
Task 1: Review Information About Products 3-2
Task 2: Review Release Documents and Softdocs 3-3
Task 3: Create a New Software Revision 3-4
Task 4: Copy Products to the New Software Revision 3-5
Task 5: Change the Software Revision Notes 3-5
Procedures 3 and 4: Build and Apply the Configuration Revision 3-5
Task 1: Initiate the Build/Apply Request 3-5
Task 2: Indicate a Build or Build/Apply Request 3-5
Task 3: Specify the SYSnn Subvolume 3-5
Task 4: Edit the Planner Instructions to Operator 3-5
Task 5: Schedule the Request 3-6
Task 6: Set Output Options 3-6
Task 7: Set the System Generation Options 3-6
Task 8: Set Target Subvolume Locations 3-6