enoft Manual

eNOFT Options
eNOFT Manual—527507-005
2-5
SET HISTORYBUFFER or SHB
[ : : : main]
0x00000010: {0: 00008000000 M nop.m 0x00
1: 00000000000 I mov r33 = rp
2: 00008000000 I nop.i 0x00 ;;
template: 0x01}
[ : : : main]
0x00000020: {0: 10800c60500 M adds r20 = 0x030, sp ;;
1: 00000000000 M st8 [r20] = r34
2: 00008000000 I nop.i 0x00
template: 0x0a}
14 T399myClass<long> thisMyClass;
[ 2:004:0014:0 main]
0x00000030: {0: 00008000000 M nop.m 0x00
1: 00000000000 I nop.i 0x00
2: 0b1fe7db000 B br.call.sptk.many rp = $-49456 ;;
template: 0x11}
[ : : : main]
0x00000040: {0: 10800c60500 M adds r20 = 0x030, sp ;;
1: 00000000000 M ld8 r34 = [r20]
2: 00008000000 I nop.i 0x00 ;;
template: 0x0b}
When specified, the local command format option <format_spec> will take
precedence over this command.
SET HISTORYBUFFER or SHB
SHB <num>
This command sets maximum number of command lines available for retrieval by
the HISTORY command.
<num> specifies the number of command lines in the history buffer. New to eNOFT,
this argument is mandatory.
The default is 50 with a range from zero to 65535.
Notes: