enoft Manual

eNOFT Options
eNOFT Manual—527507-005
2-28
RTDU
The following shows the dynamic relocation table for a loadfile:
enoft> reloc
******** Section .rela.dyn (File Offset 0x17c8)
Index Reloc_Site Reloc_Type Addend Section
Target_Symbol
---------------------------------------------------------------------
0 0x0000000008000000 REL32MSB 0x0000000000000000
1 0x0000000008000220 REL64MSB 0x0000000000000000
2 0x0000000008000230 IPLTMSB 0x0000000000000000
C_INT_INIT_COMPLETE_
3 0x0000000008000240 IPLTMSB 0x0000000000000000
printf
4 0x00000000080001f0 DIR64MSB 0x0000000000000000 .data
b
5 0x0000000008000250 IPLTMSB 0x0000000000000000
C_INT_INIT_START_
6 0x00000000080001f8 DIR64MSB 0x0000000000000000
errno
7 0x0000000008000200 DIR64MSB 0x0000000000000000
environ
8 0x0000000008000208 DIR64MSB 0x0000000000000000 .data
_MCB
9 0x0000000008000210 DIR64MSB 0x0000000000000000 .data
hw
10 0x0000000008000260 IPLTMSB 0x0000000000000000
exit
11 0x0000000008000218 DIR64MSB 0x0000000000000000 .data
a
This command incorporates the NOFT command DYNREL.
RTDU
[ { * | SOURCE | OBJECT } [ DETAIL | D ] ]
New to eNOFT, this command displays the header information for the RTDU
sections in the object file.