Expand Configuration and Management Manual (H06.03+)

Contents
Expand Configuration and Management Manual—529522-002
viii
11. Configuring Expand-Over-SNA
Lines (continued)
11. Configuring Expand-Over-SNA Lines (continued)
Profile Modifiers 11-16
Recommended Modifiers 11-16
Modifiers for Special Features 11-16
PEXQSNAM Modifiers 11-17
12. Configuring Expand-Over-ServerNet Lines
Required Hardware and Software 12-1
Expand Manager Process ($ZEXP) 12-2
External System Area Network Manager (SANMAN) 12-2
Message Monitor Process (MSGMON) 12-2
Network Access Method (NAM) 12-3
Network Control Process ($NCP) 12-3
Cluster Switch 12-3
Profile Products 12-3
ServerNet Cluster Monitor Process ($ZZSCL) 12-4
ServerNet Cluster Product 12-4
Wide Area Network (WAN) Subsystem 12-4
X and Y Fabrics 12-4
Topology Considerations 12-5
Summary of Configuration Steps 12-6
Configuring a ServerNet Node 12-6
Step 1: Create a Profile for the Expand-Over-ServerNet Line-Handler Process 12-6
ADD Profile Command 12-7
Step 2: Create a Device for the Expand-Over-ServerNet Line-Handler Process 12-8
ADD DEVICE Command 12-8
Considerations 12-10
Example 12-10
Step 3: Start the Expand-Over-ServerNet Line-Handler Processes 12-11
Example 12-11
Step 4: Start the Expand-Over-ServerNet Lines 12-11
Profile Modifiers 12-12
Modifiers for Special Features 12-12
PEXPSSN Modifiers 12-12