Expand Configuration and Management Manual (H06.03+)

Contents

Expand Configuration and Management Manual—529522-002

13. Configuring Multi-Line Paths

Configuration Overview 13-1

Configuration Considerations 13-2

Summary of Configuration Steps 13-2

Step 1: Create a Profile for the Path-Logical Device 13-3

ADD PROFILE Command 13-3

Step 2: Create a Profile for Each Line Type 13-4

ADD PROFILE Command 13-4

Step 3: Create a Path-Logical Device 13-5

ADD DEVICE Command 13-5

Considerations 13-7

Step 4: Create the Line-Logical Devices 13-7

ADD DEVICE Command 13-7

Considerations 13-12

Step 5: Start the Path-Logical Device 13-13

Step 6: Start the Lines 13-13

Starting Specific Lines 13-13

Configuration Example 13-14

Path-Logical Device Modifiers 13-15

Modifiers for Special Features 13-15

PEXPPATH Modifiers 13-15

Line-Logical Device Modifiers 13-16

X25AM Process Modifiers 13-16

PEXQMSWN and PEXQMSAT Modifiers 13-17

PEXQMNAM Modifiers 13-18

PEXQMIP Modifiers 13-19

PEXQMATM Modifiers 13-21

Part III. Subsystem Control Facility (SCF)

14. Subsystem Control Facility (SCF) Commands

Overview of the Expand Subsystem SCF Interface 14-2

Expand Subsystem Objects 14-2

Object States 14-4

SCF Commands and Objects 14-5

Sensitive and Nonsensitive Commands 14-5

Wild-Card Support 14-6

Time Values 14-6