Expand Configuration and Management Manual (H06.03+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—529522-002
14-28
Considerations
Superpath
reports ON if the path is configured to be a member of a multi-CPU path and OFF
if it is not. The Expand line-handler process at the other end of the path must be
configured with SUPERPATH_ON or the multi-CPU path feature will not be
enabled. You can display the current setting of the SUPERPATH attribute using
the STATUS PATH command.
PathBlockBytes
shows the multipacket frame parameters for these four fields:
Local Currently configured local value
Remote Most recent value from the remote path
Negotiated Amount that is currently in use; the lesser of the Local
and Remote values
Maximum Maximum value available on this path
PathPacketBytes
shows the variable packet parameters for these four fields:
Local Currently configured local value
Remote Most recent value from the remote path
Negotiated Amount that is currently in use; the lesser of the Local and
Remote values
Maximum Maximum value available on this path
Considerations
You can display information about several paths with a single INFO command by
specifying multiple PATH objects using parentheses as follows:
PATH ( path-name , path-name [ , path-name ] ... )