Expand Configuration and Management Manual (H06.03+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—529522-002
14-44
Expand-Over-NAM and Expand-Over-ServerNet
Line-Handler Processes
L2Timeout
reports the time interval of the Layer 2 T1 timer.
Associatedev
reports the name of the X25AM or SNAX/APN process associated with the
Expand-over-NAM process. For Expand-over-ServerNet line-handler processes,
this field shows $ZZSCL.
Associatesubdev
reports the name of the NAM subdevice that will be activated by the Expand-over-
NAM process. The subdevice name for Expand-over-X.25 line-handler processes
is the name of an X25AM subdevice. For Expand-over-SNA line-handler processes
it is the subdevice name of a SNAX/APN logical unit (LU). This field is not used by
Expand-over-ServerNet line-handler processes.
Example 14-11 shows the display format for a LINE object with the DETAIL option for
Expand-over-NAM or Expand-over-ServerNet line-handler processes. The asterisk (*)
indicates an alterable attribute.
L2Protocol
lists the name of the Layer 2 protocol process associated with the Expand-over-
NAM or Expand-over-ServerNet line-handler process.
TimeFactor
reports the current time factor for this line. See Routing and Time Factors on
page 17-21 for a discussion about time factors, including how to calculate them.
SpeedK
calculates the time factor of the line for the Expand routing algorithm. A value of
NOT_SET means that this parameter was not set. See SPEEDK n on page 16-22
for a discussion of SPEEDK.
Example 14-11. INFO LINE, DETAIL Command, Expand-Over-NAM and
Expand-Over-ServerNet Line-Handler Processes
-> INFO LINE $SC151, DETAIL
L2Protocol Net^Nam TimeFactor...... 1 *SpeedK........ NOT_SET
Framesize....... 132 -Rsize........... 1 -Speed........
*LinePriority.... 1 StartUp......... OFF Delay......... 0:00:00.10
*Rxwindow........ 7 *Timerbind... 0:01:00.00 *L2Timeout..... 0:00:01.00
*Txwindow........ 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:01:00.00 *Retryprobe...... 10 *Timerprobe.... 0:00:30.00
*Associatedev.... $ZZSCL *Associatesubdev *Timerinactivity 0:00:00.00
*ConnectType..... ACTIVEANDPASSIVE
*LineTf.......... 0