Expand Configuration and Management Manual (H06.03+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—529522-002
14-46
Expand-Over-NAM and Expand-Over-ServerNet
Line-Handler Processes
Maxreconnects
is the maximum number of times the Expand-over-NAM or Expand-over-ServerNet
line-handler process will try a connect request after successfully binding to the
NAM interface.
AfterMaxRetries
lists the line state once all retries have been exhausted for the Expand-over-NAM
or Expand-over-ServerNet line-handler process. DOWN causes the line state to be
down. PASSIVE causes the Expand-over-NAM process to switch to
PASSIVECONNECTONLY (which supersedes the function of
ACTIVEANDPASSIVECONNECT). This attribute applies to Expand-over-NAM and
Expand-over-ServerNet line-handler processes that have the MAXRECONNECTS
modifier set to a nonzero value.
Timerreconnect
specifies the time interval that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will wait for a connection request to succeed. See Time
Values on page 14-6 for a description of the time interval format
Retryprobe
reports the number of times that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will retry its probe of the NAM before deciding that the
network is unavailable.
Timerprobe
specifies the time interval that the Expand-over-NAM or Expand-over-ServerNet
line-handler process will wait to obtain the status of the NAM process. See Time
Values on page 14-6 for a description of the time interval format
Associatedev
reports the name of the X25AM or SNAX/APN process associated with the
Expand-over-NAM process. For Expand-over-ServerNet line-handler processes,
this field shows $ZZSCL.
Associatesubdev
reports the name of the NAM subdevice that will be activated by the Expand-over-
NAM process. The subdevice name for Expand-over-X.25 line-handler processes
is the name of an X25AM subdevice. For Expand-over-SNA line-handler
processes, it is the name of a SNAX/APN logical unit (LU). This field is not used by
Expand-over-ServerNet line-handler processes.
Timerinactivity
specifies the time interval that an Expand-over NAM (i.e., Expand-over-X.25 or
Expand-over-SNA) line-handler process will wait during a period of inactivity before