Expand Configuration and Management Manual (H06.03+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—529522-002
14-50
INFO PROCESS Command
DETAIL
causes detailed information of $NCP attributes to be displayed. If not specified,
only one line of $NCP attribute information is displayed.
The display for the INFO PROCESS $NCP command without the DETAIL option has
the format as shown in Example 14-12. The asterisk (*) denotes an alterable attribute.
Name
is the device name of the network control process ($NCP).
AutomaticMaptimer
reports the current map-propagation rate in effect in the Expand network.
Framesize
reports the network-wide frame size (in words) used by all line-handler processes
in the Expand network. $NCP uses this value to calculate the number of entries in
the distance vector (DV) or map packet (that is, the maximum size of the map
packet).
Maxtimeouts
defines the maximum number of retry attempts allowed to establish a connection.
Maxconnects
specifies the maximum number of times $NCP will attempt a connection (CONN)
request.
The display for the INFO PROCESS $NCP command with the DETAIL option has the
format as shown in Example 14-13. The asterisk (*) denotes an alterable attribute.
Example 14-12. INFO PROCESS $NCP Command
-> INFO PROCESS $NCP
EXPAND Info PROCESS $NCP AT \NODEA (151)
Name AutomaticMaptimer Framesize *Maxtimeouts *Maxconnects
$NCP ON #132 3 5