Expand Configuration and Management Manual (H06.03+)

Subsystem Control Facility (SCF) Commands
Expand Configuration and Management Manual—529522-002
14-53
INFO PROCESS Command
Message 47
reports whether the reporting of event message 47 to $0 is enabled (ON).
Message 47 is a critical message. It means that an end-to-end acknowledgment
was not received from the indicated system within the configured Layer 4 timeout
interval.
Message 48
reports whether the reporting of event message 48 to $0 is enabled (ON) or
disabled (OFF). Message 48 is a critical message. It means that a change in
processor status has occurred at the indicated system.
Message 49
reports whether the reporting of event message 49 to $0 is enabled (ON) or
disabled (OFF). Message 49 is a critical message. It means that $NCP has not
received a status message from $NCP at the indicated system for three time
periods.
AutoRebal
reports whether automatic rebalancing of the multi-CPU paths on the system is
enabled (ON) or disabled (OFF).
Next Rebalance Time
shows the time of day of the next scheduled automatic rebalancing of multi-CPU
paths on the system. The time of day is displayed in the following format:
[DDD/]HH:MM:SS
where
[DDD/]
shows the number of days that the specified time of day will be skipped before
the next automatic rebalancing will occur.
HH
shows the hours.
MM
shows the minutes.
SS
shows the seconds.