Expand Configuration and Management Manual (H06.03+)

Expand Modifiers
Expand Configuration and Management Manual—529522-002
16-28
Profiles
The default must be changed before the line is started. The address must be specified
by number (for example, 31CA:B145:5489:1034:1784:B245:4029:1257). Configuring
NonStop TCP/IPv6 addresses is explained in the TCP/IPv6 Configuration and
Management Manual.
Profiles
This subsection lists the modifiers that are contained in each of the profiles.
Single-Line Expand Line-Handler Process Modifiers
Table 16-3 lists the modifiers in the profiles provided for single-line Expand line-handler
processes.
Table 16-3. Single-Line Path Modifiers (page 1 of 3)
Modifier
PEXQSSWN PEXQSSAT PEXQSIP PEXQATM PEXQSNAM PEXPSSN PEXQSFX
AFTERMAXRETRIES_
DOWN
XX X X X
AFTERMAXRETRIES_
PASSIVE
XX X X X
ASSOCIATEDEV
XX X X X
ASSOCIATESUBDEV
XX
ATMSEL
X
CALLTYPE_ATMSAP
X
CALLTYPE_PVC
X
CALLTYPE_SVC
X
CLOCKMODE_DCE
XX
CLOCKMODE_DTE
XX
CLOCKSPEED_600
XX
CLOCKSPEED_1200
XX
CLOCKSPEED_2400
XX
CLOCKSPEED_4800
XX
CLOCKSPEED_9600
XX
CLOCKSPEED_19200
XX
CLOCKSPEED_38400
XX
CLOCKSPEED_56000
XX
CLOCKSPEED_115200
XX
COMPRESS_OFF
XXXXXXX
COMPRESS_ON
XXXXXXX