Expand Configuration and Management Manual (H06.03+)

Expand Configuration and Management Manual—529522-002
18-1
18 Managing the Network
This section explains how to access network resources, set up network security, and
monitor, reconfigure, and control an Expand network. Topics explained in this section
include the following:
•
Accessing Network Resources on page 18-1
•
Setting Up Network Security on page 18-6
•
Monitoring Network Activity on page 18-12
•
Reconfiguring the Network on page 18-19
•
Controlling the Network on page 18-25
Refer to the following sources for detailed information about the commands described
in this section:
•
For Expand Subsystem Control Facility (SCF) commands, refer to Section 14,
Subsystem Control Facility (SCF) Commands.
•
For WAN subsystem SCF commands, refer to the WAN Subsystem Configuration
and Management Manual.
•
For Kernel subsystem SCF commands, refer to the SCF Reference Manual for the
Kernel Subsystem.
•
For general SCF commands, refer to the SCF Reference Manual for G-Series
RVUs.
•
For a comparison of the commands provided by the SCF interface to the Expand
subsystem and the SCF interface to the WAN subsystem, refer to Appendix B,
Expand and WAN SCF Comparison.
Accessing Network Resources
This subsection describes how to use HP commands and utilities to access resources
on remote nodes in an Expand network. Topics explained in this section include the
following:
•
Using TACL to Manage Remote Files on page 18-2
•
Using Disk-File Names on page 18-2
•
Changing Your Default Values on page 18-3
•
Gaining Access to Remote Nodes on page 18-4