Expand Configuration and Management Manual (H06.03+)

Troubleshooting
Expand Configuration and Management Manual—529522-002
20-19
Expand-Over-IP Problems
Expand-Over-IP Problems
You can diagnose most Expand-over-IP line-handler process problems using
information provided by the Expand subsystem SCF STATUS LINE command with the
DETAIL option. This command provides error information in the Detailed State and
Detailed Info fields. Example 20-7 shows an SCF STATUS LINE, DETAIL command
display. (The Detailed State and Detailed Info fields are shown in boldface type.)
Detailed State Field For Expand-Over-IP Lines
Table 20-11 describes the detailed states displayed in the Detailed State field for
Expand-over-IP line-handler processes.
Example 20-7. SCF STATUS LINE, DETAIL Command
-> STATUS LINE $SC151, DETAIL
EXPAND Detailed Status LINE $SC151
PPID............... ( 2, 282) BPID................. ( 3, 282)
State.............. STARTED Path LDEV............ 109
Trace Status....... OFF Effective line priority 1
Detailed State..... CONNECTED Status READY
Detailed Info... None
Trace File Name.... \NODEA.$DATA00.STATUS.TRC
Table 20-11. Detailed States (Expand-Over-IP) (page 1 of 3)
Detailed State Cause/Effect Recovery
BINDING The Expand-over-IP line-handler
process is binding to the local
NonStop TCP/IP process.
This state is normal while the line is
coming up. If the line remains in
this state, an internal error may
have occurred.
If this state persists, contact
your HP support
representative.
CONNECTED A connection has been established. This state is normal. No
recovery is required.