Expand Configuration and Management Manual (H06.03+)

Expand Configuration and Management Manual—529522-002
Index-1
Index
A
ABORT command 14-8/14-9
ABORT LINE command 18-26
ABORT PATH command 18-26
ABORTTIMER attribute
ALTER PROCESS $NCP command
and 14-21
INFO PROCESS $NCP command
and 14-51
ABORTTIMER modifier 6-4, 17-27
ACK 17-14
ACTIVATE command 14-9
ACTIVATE PROCESS $NCP 18-27
Active connect request 17-50, 17-53, 17-59
ADD DEVICE command 18-19
ADDRESS attribute, INFO LINE command
and 14-32
AFTERMAXRETRIES attribute
ALTER LINE command and 14-14
INFO LINE command and 14-35,
14-37, 14-42, 14-46
AFTERMAXRETRIES_DOWN
modifier 16-4, 17-51, 17-54, 17-59
AFTERMAXRETRIES_PASSIVE
modifier 16-4, 17-51, 17-54, 17-59
ALGORITHM modifier 6-5, 14-51
ALTER DEVICE command 14-10, 17-22
ALTER LINE command 14-12, 14-20,
17-22
ALTER PATH command 14-11/14-12
ALTER PROCESS $NCP
command 14-21/14-23, 18-27
Altering several lines 14-18
Altering several paths 14-12
ALTTCPIP attribute 20-14
Application message size
effect on performance of 19-7
Expand subsystem overhead and 19-8
Applications, writing network 2-2
ASAP 20-10
ASSOCIATEDEV attribute
ALTER LINE command and 14-14
INFO LINE command and 14-34,
14-38, 14-40, 14-42, 14-44, 14-46
ASSOCIATEDEV modifier 16-4, 20-18
ASSOCIATESUBDEV attribute
INFO LINE command and 14-40,
14-42, 14-44, 14-46
ASSOCIATESUBDEV modifier 16-5
Asynchronous Transfer Mode (ATM)
addresses 9-6
subsystem 9-3, 17-57
ATM 3 ServerNet adapter 9-3, 17-6
ATM addresses 9-6, 17-58
ATM protocol direct service access point
(ATMSAP) 9-5
ATM subsystem 9-3, 17-57
See also Asynchronous Transfer Mode
(ATM) subsystem
ATM3SA 8-5, 9-3, 17-6
ATMSAP connections 9-1, 17-57/17-58
ATMSEL modifier 16-5
AUTOLOAD attribute, INFO LINE command
and 14-32
AUTOMATICMAPTIMER attribute, INFO
PROCESS $NCP command and 14-50
AUTOMATICMAPTIMER modifier 6-5,
17-26
AUTOREBAL attribute
ALTER PROCESS $NCP command
and 14-21
INFO PROCESS $NCP command
and 14-53
AUTOREBALTIME attribute
ALTER PROCESS $NCP command
and 14-22
INFO PROCESS $NCP command
and 14-54