Expand Configuration and Management Manual (H06.03+)

Contents

Expand Configuration and Management Manual—529522-002

8. Configuring Expand-Over-IP Lines (continued)

Step 1 (A): Select a Process and SUBNET for NonStop TCP/IP Use 8-9

Select a NonStop TCP/IP Process 8-9

Select a SUBNET for NonStop TCP/IP 8-9

Creating an Ethernet SUBNET or ATM SUBNET 8-10

Step 1 (B): Select a Process and SUBNET for NonStop TCP/IPv6 Use 8-11

Select a SUBNET for NonStop TCP/IPv6 Use 8-11

Select a TCP6SAM Process 8-13

Creating an Ethernet Subnet 8-14

Step 2 (A): Identify an Available UDP Port Number 8-14

Step 2 (B): Identify an Available UDP Port Number for TCP/IPv6 Use 8-15

Step 3: Create a Profile for the Line-Handler Process 8-17

ADD Profile Command 8-17

Example 8-18

Step 4: Create the Line-Handler Process 8-18

ADD DEVICE Command 8-18

Considerations 8-21

Step 5: Start the Line-Handler Process 8-22

Step 6: Start the Line 8-23

Add a Configured Tunnel for an Expand Line 8-23

Profile Modifiers 8-25

Recommended Modifiers 8-25

Modifiers for Special Features 8-26

PEXQSIP Modifiers 8-26

9. Configuring Expand-Over-ATM Lines

Required Hardware and Software 9-2

QIO Subsystem 9-2

ATM Subsystem 9-3

SLSA Subsystem 9-3

ATM 3 ServerNet Adapter (ATM3SA) 9-3

Topology Considerations 9-4

Summary of Configuration Steps 9-5

Step 1: Identify the ATM Connection 9-5

Configuring an Expand Line-Handler Process That Uses a PVC 9-6

Configuring an Expand Line-Handler Process That Uses an SVC 9-6

Configuring an Expand Line-Handler Process That Uses ATMSAP 9-9