Expand Configuration and Management Manual (H06.03+)

Contents
Expand Configuration and Management Manual—529522-002
vi
9. Configuring Expand-Over-ATM
Lines (continued)
9. Configuring Expand-Over-ATM Lines (continued)
Step 2: Create a Profile for the Line-Handler Process 9-10
ADD Profile Command 9-11
Example 9-11
Step 3: Create the Line-Handler Process 9-12
ADD DEVICE Command 9-12
Considerations 9-16
Examples 9-16
Step 4: Start the Line-Handler Process 9-17
Step 5: Start the Line 9-17
Profile Modifiers 9-17
Recommended Modifiers 9-18
Modifiers for Special Features 9-19
PEXQSATM Modifiers 9-19
10. Configuring Expand-Over-X.25 Lines
Required Hardware and Software 10-1
X25AM Line-Handler Process 10-3
QIO Subsystem 10-3
Wide Area Network (WAN) Shared Driver 10-3
NonStop TCP/IP Process 10-3
Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 10-4
Ethernet 4 ServerNet Adapter (E4SA) 10-4
Fast Ethernet ServerNet Adapter (FESA) 10-4
Gigabit Ethernet ServerNet Adapter (GESA) 10-4
Gigabit Ethernet 4-Port ServerNet Adapter (G4SA) 10-4
ServerNet Wide Area Network (SWAN) Concentrator 10-5
Topology Considerations 10-5
Summary of Configuration Steps 10-7
Step 1: Add a NAM Subdevice to the X25AM Line 10-7
Considerations 10-8
Step 2: Start the X25AM Line 10-8
Step 3: Create a Profile for the Expand-Over-X.25 Line-Handler Process 10-8
ADD Profile Command 10-9
Example 10-9
Step 4: Create the Expand-Over-X.25 Line-Handler Process 10-10
ADD DEVICE Command 10-10
Considerations 10-12
Examples 10-12