Expand Configuration and Management Manual (H06.03+)

Contents
Expand Configuration and Management Manual—529522-002
vii
10. Configuring Expand-Over-X.25
Lines (continued)
10. Configuring Expand-Over-X.25 Lines (continued)
Step 5: Start the Expand-Over-X.25 Line-Handler Process 10-12
Step 6: Start the Expand-Over-X.25 Line 10-13
Profile Modifiers 10-13
Recommended Modifiers 10-13
Modifiers for Special Features 10-14
X25AM Line-Handler Process Modifiers 10-14
PEXQSNAM Modifiers 10-14
11. Configuring Expand-Over-SNA Lines
Required Hardware and Software 11-1
SNAX/APN Line-Handler Process 11-3
QIO Subsystem 11-3
Wide Area Network (WAN) Shared Driver 11-3
NonStop TCP/IP Process 11-4
Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 11-4
Ethernet 4 ServerNet Adapter (E4SA) 11-4
Fast Ethernet ServerNet Adapter (FESA) 11-4
Gigabit Ethernet ServerNet Adapter (GESA) 11-5
Gigabit Ethernet 4-Port ServerNet Adapter (G4SA) 11-5
ServerNet Wide Area Network (SWAN) Concentrator 11-5
Topology Considerations 11-5
Summary of Configuration Steps 11-7
Step 1: Add the SNAX/APN Line 11-8
Considerations 11-8
Step 2: Add the LUs for the SNAX/APN Line 11-8
Considerations 11-9
Example 11-9
Step 3: Start the SNAX/APN Line 11-11
Step 4: Create a Profile for the Expand-Over-SNA Line-Handler Process 11-11
ADD Profile Command 11-11
Example 11-12
Step 5: Create the Expand-Over-SNA Line-Handler Process 11-12
ADD DEVICE Command 11-12
Considerations 11-14
Examples 11-14
Step 6: Start the Expand-Over-SNA Line-Handler Process 11-15
Step 7: Start the Expand-Over-SNA Line 11-15