Fibre Channel ServerNet Adapter Installation and Support Guide (G06.28+, H06.03+)

Contents
Fibre Channel ServerNet Adapter Installation and Support Guide—528254-012
iii
3. Replacing an FCSA
3. Replacing an FCSA
Overview of FCSA Replacement Procedures 3-1
Prepare to Replace an FCSA 3-2
Preparation Checklist 3-2
Gather the Proper Tools 3-2
Print the FCSA Forms 3-2
Determine the Physical Location of the FCSA 3-3
Identify the Devices 3-4
Switch the Paths to Another FCSA 3-6
Stop the Devices That Are Using the Adapter 3-6
Label the Fibre Channel Cables 3-6
Replace the FCSA 3-7
Review Standard Operating Practices 3-7
Use OSM to Replace the Adapter 3-7
Download the Firmware 3-10
Verify the Installation of the FCSA 3-10
Update the Firmware 3-10
Download Firmware for One FCSA 3-11
Download Firmware for Multiple FCSAs 3-11
Resume Operations 3-12
Restart the Connected Paths 3-12
Verify That the Connected Devices Are Operational 3-13
Obtain the Fibre Channel Port WWNs and Complete the FCSA to ESS
Configuration Form 3-13
Connect External Paths 3-15
4. Relocating an FCSA
Overview of FCSA Replacement Procedures 4-1
Prepare to Relocate an FCSA 4-2
Remove and Relocate the FCSA 4-2
Review Standard Operating Practices 4-3
Remove the Adapter 4-3
Install the FCSA in its New Slot 4-3
Verify the Installation of the FCSA 4-3
Resume Operations 4-4
Connect External Devices 4-4
Alter or Add DISK Objects 4-4
Restart the Connected Devices 4-4
Troubleshooting 4-4