Gigabit Ethernet ServerNet Adapter Installation and Support Guide

Installing a GESA
Gigabit Ethernet Adapter Installation and Support Guide—523628.005
2-11
Install the GESA
5. Using both hands, hold the GESA so that its ejector is at the top. Carefully insert
the adapter into its slot in the enclosure. Push the GESA to the rear of its slot, but
don't force it.
Caution. To avoid damaging the connector pins, apply equal pressure to both the top and
bottom of the GESA when pushing it into its slot. If the pins are damaged, both the GESA and
the backplane (or enclosure) must be replaced.
VST075.vsd