Gigabit Ethernet ServerNet Adapter Installation and Support Guide

Contents

Gigabit Ethernet Adapter Installation and Support Guide—523628.005

3. Replacing a GESA

Install a GESA 2-8

Unpack and Inspect the GESA 2-8

Install the GESA 2-9

Verify the Installation of the GESA 2-15

Add and Start the GESA Using SCF 2-16

3. Replacing a GESA

Prepare to Replace a GESA 3-2

Service Class 3-2

Gather the Proper Tools 3-2

Print the GESA Planning Worksheet 3-3

Identify Any Communications Lines and ServerNet Wide Area Network (SWAN)

Using the GESA 3-4

Redirect or Stop Any Customer Applications Using the GESA 3-9

Stop the Communications Lines and SWAN Concentrator Line Using the

GESA 3-9

Determine the Physical Location of the GESA 3-14

Abort the GESA 3-14

Label the Communication Cable Connected to the GESA 3-15

Replace the GESA 3-16

Review Standard Operating Practices 3-16

Remove the Adapter 3-16

Unpack and Inspect the GESA 3-18

Install the GESA 3-18

Verify the Installation of the GESA 3-19

Resume Operations 3-19

Start the GESA 3-19

Restart the Communications Lines 3-21

Verify that the Communications Lines are Restarted 3-22

Resume Customer Applications 3-25

4. Relocating a GESA

Prepare to Relocate a GESA 4-2

Gather the Proper Tools 4-2

Print the GESA Planning Worksheet 4-2

Identify Any Communications Lines and ServerNet Wide Area Network (SWAN)

Using the GESA 4-2

Redirect or Stop Any Customer Applications Using the GESA 4-2

Stop the Communications Lines and SWAN Concentrator Line Using the

GESA 4-3