Gigabit Ethernet ServerNet Adapter Installation and Support Guide

Replacing a GESA
Gigabit Ethernet Adapter Installation and Support Guide—523628.005
3-7
Identify Any Communications Lines and ServerNet
Wide Area Network (SWAN) Using the GESA
6. Use the SCF INFO PROCESS command for the IPXPROTO process you identified
in Step 5 to determine the IPXPROTO process associated with the LIF on the
GESA to be replaced. Write down the associated LIF and IPXPROTO process on
your worksheet.
INFO PROCESS $process-name
7. Use the SCF LISTDEV command to display the single-line Expand-over-IP lines to
identify the names of Expand-over-IP lines configured on the system (see
Example 3-8).
LISTDEV TYPE 63,2
8. Use the SCF INFO LINE command with the DETAIL option for each Expand-over-
IP line you identified in Step 7 to determine if any of the Expand-over-IP lines
configured on the system use the port on the GESA to be replaced (see
Example 3-7. SCF INFO PROCESS Command
->INFO PROCESS $ZNV0
IPXSPX Info PROCESS
Process Name Primary CPU Backup CPU *I/O Port Name I/O Port Type
$ZNV0 2 3 L018 IPXETH 802.3
Example 3-8. SCF LISTDEV Command
->LISTDEV TYPE 63,0
LDev Name PPID BPID Type Rsize Pri Program
109 $IPYEA 3,9 2,7 (63,0) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
159 $IPCORE 0,16 1,15 (63,0) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
In this example, two Expand-over-IP lines (named $IPYEA and $IPCORE) are
configured on the system.
This is an example of the SCF LISTDEV command display for Expand-over-IP lines
that are part of a multiline path:
->LISTDEV TYPE 63,2
LDev Name PPID BPID Type Rsize Pri Program
56 $IPC03 2,16 3,16 (63,2) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
84 $IPC02 2,16 3,16 (63,2) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ