H06.03 Software Installation and Upgrade Guide
H06.03 Software Installation and Upgrade Guide—540066-002
10-1
10
Loading the Previous H06.03 and
Resuming Normal Operations
This section describes how to perform a system load of the H06.03 of the NonStop
operating system into the memory of each processor in an Integrity NonStop NS-series
server.
Alerts
Before performing a system load:
•
Before halting the processors, stop running applications, including TMF.
•
Do not close the System Startup dialog box while startup is in progress. If you
attempt to close the dialog box, a message dialog box appears to alert you that the
system startup process will be stopped if you continue.
•
If you stop a system startup before it has finished, the state of your system will be
unpredictable. You might need to perform another system startup to enable the
system to resume normal operation.
•
If you must stop the system startup process, click Abort. (The abort process
should take effect within 30 seconds.)
•
For detailed information on performing a system load of an Integrity NonStop
NS-series server, see Section 15 in the NonStop NS-Series Operations Guide.
Note. To stop TMF, at a TACL prompt, enter:
5> TMFCOM STOP TMF