H06.03 Software Installation and Upgrade Guide

Installing SWID, DSM/SCM PVU, and Planner
Interface (PI) Client Software
H06.03 Software Installation and Upgrade Guide—540066-002
B-8
Build and Apply the DSM/SCM H01 Software
Product Revision
2. Click Edit instructions to display the Planner Instructions box.
3. Edit the instructions to provide the current SYSnn number, and then click OK.
4. Complete the Build/Apply Request dialog box:
a. Under Perform steps, select Build, apply & process snapshot.
b. Enter the current SYSnn in the Activation SYSnn text box (because no
SYSGEN is required).
c. Click OK.
DSM/SCM runs the Build/Apply requests and displays a Status dialog box that is
automatically updated at regular intervals.
5. Check EMS messages for more detailed information about your Build/Apply:
•
From the Status window, click Show EMS events.
•
In the EMS Events window, click Refresh to see newer messages.
•
When finished viewing, click Close.
6. To confirm that the Build and Apply tasks finish successfully and that a snapshot
has been received into the host database, wait until the status shows that all
requests are complete.
7. Select Window>Refresh.
The Configurations Revision dialog box is refreshed and shows the new software
configuration revision containing the H01 DSM/SCM SPR.
VST254.vsd