H06.03 Software Installation and Upgrade Guide
Overview of Installing the H06.03 RVU
H06.03 Software Installation and Upgrade Guide—540066-002
1-4
OSM and the H06.03 RVU
•
OSM Modular Low Level Link (T0633G06^AAL)
•
OSM Console Tools (T0634G06^AAJ)
OSM and the H06.03 RVU
OSM has been enhanced to support the HP Integrity NonStop NS-series servers. The
OSM Low-Level Link allows you to support both G-series and H-series at the same
time. The OSM LLL provides support using the Maintenance Entity (ME) firmware
running on the ServerNet switch board of P-switches and IOAMs.
Only OSM supports H-series RVUs. As of H06.03, these objects are monitored by
OSM processor switch. Each processor switch has these subcomponents:
•
One maintenance PIC
•
One PIC for HP NonStop ServerNet Cluster for connectivity
•
One crosslink PIC for connecting to the processor switch on the other fabric
•
Four PICs (for processor connectivity)
•
Six PICs for connecting to IOAMs or IOMF2s.
OSM provides a guided procedure for replacing a processor switch and its
components.
•
Disk drive enclosures, each containing:
°
Up to 14 disk drives
°
Two FC-AL I/O modules
°
Two power supplies
°
Two fans
°
One environmental monitoring unit (EMU)
•
Power fail
•
Processor complex (blade complex) view
•
HP NonStop S-series IOMF2 cabinets and components attached to processor
switch
OSM supports these firmware updates:
•
The processor switch
•
Gigabit 4-port ServerNet adapter (G4SA)
•
Fibre Channel ServerNet adapter (FCSA)
•
SWAN and SWAN 2 concentrators
•
Disk drive enclosure replacement procedures
•
Processor complex (NonStop Blade Complex) firmware updates