H06.03 Software Installation and Upgrade Guide
Overview of Installing the H06.03 RVU
H06.03 Software Installation and Upgrade Guide—540066-002
1-11
Managing Firmware in a Processor Complex (Blade
Complex)
Updating ME FPGA Firmware
Table 1-2 shows the Processor Switch firmware file (ME FPGA under OSM attributes):
You use the OSM Service Connection to update the ME FPGA firmware:
1. In the OSM Service Connection tree pane: select System > Fabric Group >
Internal ServerNet Fabric>Processor Switch>ServerNet Switch Board.
2. Right-click ServerNet Switch Board
3. In the Actions dialog box select ME FPGA Update and click Perform Action.
4. Monitor the update.
Managing Firmware in a Processor Complex (Blade Complex)
These terms briefly describe the processor (blade) complex, which is composed of two
or three slices (blade elements) and their associated logical synchronization units
(LSUs):
Table 1-2. Processor Switch Firmware (ME FPGA)
Product
Number Description Host FRU
Disk File
Name
Default
Location Tool
Related
Information
T0437A01
^AAA
Processor
Switch
(Pswitch)
ServerNet
Switch
Board
(IOAM)
SAM0437 SYSnn OSM SC OSM online help
Note. In software interfaces and messages, you might see:
•
The term slice, which is equivalent to the term NonStop Blade Element (NSBE). In a
future RVU, the term slice will be replaced with NonStop Blade Element, Blade Element, or
NSBE.
•
The term processor complex, which is equivalent to the term NonStop Blade Complex
(NSBC). In a future RVU, the term processor complex will be replaced with NonStop
Blade Complex, Blade Complex, or NSBC.