H06.03 Software Installation and Upgrade Guide

Preparing to Upgrade the Server Software
(Preinstallation Tasks)
H06.03 Software Installation and Upgrade Guide—540066-002
3-8
Verify Disk Drives
Verify Disk Drives
1. Enter the SCF STATUS DISK command:
> SCF STATUS DISK $*
2. Verify that the STATUS DISK display includes all the disk drives and that the
primary, backup, mirror, and mirror-backup paths are all described as STARTED:
Verify Tape Drives (If Necessary)
You can use SCF commands or OSM to obtain status information about a tape drive.
Check that the tape drive is online before continuing with installing SPRs, RVUs, or
RVURs. Note that OSM does not test tape libraries.
1. Enter the SCF STATUS TAPE command:
> SCF STATUS TAPE $*
2. Verify that the STATUS TAPE display includes a least one tape drive configured
and running, as shown:
$SYSTEM TOOLS 48> SCF STATUS DISK $*
SCF - T9082H01 - (01MAY05) (15MAR05) - 07/06/2005 10:55:16 System \ATLAS
(C) 1986 Tandem (C) 2003 Hewlett Packard Development Company, L.P.
STORAGE - Status DISK \ATLAS.$SYSTEM
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
6 *STARTED STARTED STOPPED STOPPED 0,257 1,257
STORAGE - Status DISK \ATLAS.$AD01
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
152 *STARTED STARTED STOPPED STOPPED 0,333 1,288
STORAGE - Status DISK \ATLAS.$ADAUD
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
151 *STARTED STARTED *STARTED STARTED 0,332 1,289
STORAGE - Status DISK \ATLAS.$ADBIT
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
150 *STARTED STARTED *STARTED STARTED 0,331 1,290
STORAGE - Status DISK \ATLAS.$ADSAV
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
149 *STARTED STARTED STOPPED STOPPED 0,330 1,291
Total Errors = 0 Total Warnings = 0
$SYSTEM TOOLS 49>
STORAGE - Status TAPE $T0150
LDev State Sub State Primary Backup Device Status
PID PID
71 STARTED UP 0,282 1,273 READY