H06.03 Software Installation and Upgrade Guide

Installing a SUT for the H06.03 RVU
H06.03 Software Installation and Upgrade Guide—529400-001
4-3
Receive New Software Into the Archive
4. In the Software in Archive dialog box, click Receive software.
The Receive Software Request dialog box appears. For example:
5. In the Receive Options group box, do one of the following, depending on your
system environment:
°
Select Receive only changed files (default)
°
Select Receive all files (recommended for the new RVU)
6. Under Software name, select Provided by planner and enter a name for the
revision.
7. In the Options group box, click Input source.
The Request Source Options dialog box appears.
8. Select Tape drive.
9. From the list, select the tape drive that contains the SUT, and click OK.
The Request Source Options dialog box closes.
10. In the Options group box of the Receive Software Request dialog box, click
Scheduling.
The Request Scheduling Options dialog box appears. Make the appropriate
selections and click OK.
VST505.vsd