H06.03 Software Installation and Upgrade Guide

Installing a SUT for the H06.03 RVU

H06.03 Software Installation and Upgrade Guide—529400-001

4-11

Build and Apply the New Software Revision

The Build process creates an activation package containing all the products listed in

the new software revision.

To avoid disrupting other system activity, schedule the Build to run at night and the

Apply to run immediately after the Build. See the DSM/SCM User’s Guide for

information about scheduling the Build/Apply to run at different times.

To build and apply the new software revision:

1. In the New software revision dialog box, click Build/Apply to display the options

for your Build/Apply.

It might take several minutes for DSM/SCM to assemble the build information.

During this time, the Build/Apply Request dialog box options and commands are

dimmed and unavailable.

When the Build information is assembled, the Build/Apply Request dialog box is

refreshed. It displays default options and assigns a name to the Build/Apply

request. For example:

Note. The Activation Package contains installation instructions for the pax files of those OSS

products that contain A7CINFO files in their distributed subvolumes.