H06.03 Software Installation and Upgrade Guide

Loading the H06.03 RVU
H06.03 Software Installation and Upgrade Guide—540066-002
6-4
Steps for Loading the System
The CIIN file must be enabled because it contains commands needed to start
the server. The startup TACL process performs the commands in the CIIN file
and then logs off.
For a description of the CIIN file, see the NonStop NS-Series Planning Guide.
4. Under Configuration, ensure that all the check boxes for all paths are selected.
5. Click Start System. The system load begins.
If you want to stop the load process, click Abort in the System Load dialog box.
You might wait up to 30 seconds before the abort takes effect.
The Details dialog box displays Logon successful and Read configurations
passed:
Caution. Do not close the System Load dialog box while startup is in progress. If you attempt
to close the dialog box, an OSM message box indicates that the system startup process will be
stopped if you continue. If you stop a system startup before the operation finishes, the state of
your system cannot be predicted. You might need to perform another system startup to enable
the system to resume normal operation.