Introduction to SNA Capabilities of Tandem NonStop Systems
Configuration and Management
Introduction to SNA Capabilities of Tandem NonStop Systems–134597
6-3
Tools for Configuration and Management
Tools for Configuration and Management
Tandem SNA products support, to varying degrees, Tandem’s Distributed Systems
Management (DSM) architecture. In DSM:
•
Resources can be configured and managed interactively using the Subsystem
Control Facility (SCF) or programmatically using the Subsystem Programmatic
Interface (SPI). SCF supersedes the Communications Management Interface (CMI).
•
Event messages are sent to the Event Management Service (EMS) for filtering and
forwarding.
•
Trace records are formatted using the PTrace utility.
Table 6-1
shows DSM support and other tools for configuring and managing Tandem
SNA products.
Communications products that support SCF and SPI are managed through a common
intermediate process, the Subsystem Control Point (SCP).
Table 6-1. Tools for Configuration and Management
Product
Interactive
Configuration
& Management
Programmatic
Configuration
& Management
Event
Notification
Trace
Provision
EM3270 Product-specific Not supported EMS Product-specific
EnvoyACP/XF SCF (S-series)
CMI (K-series)
Not supported Not supported Product-specific
Exchange/SNA Product-specific Not supported Not supported Product-specific
SNAX/APC SCF SPI EMS Product-specific
SNAX/APN SCF SPI EMS PTrace
SNAX/CDF SCF SPI EMS PTrace
SNAX/CM Product-specific Product-specific EMS PTrace
SNAX Creator-2 SCF Not supported EMS No external trace
SNAX/HLS Product-specific SPI EMS Product-specific
SNAX/XF SCF SPI EMS PTrace