iTP Secure WebServer System Administrators Guide (Version 7.5+)

2 Installing the iTP Secure WebServer
This section describes the perquisites you must have for your NonStop system to run the iTP Secure
WebServer and explains how to install and configure it. This section also provides a test procedure
that you can use to verify configuration and to perform server testing.
Topics discussed in this section include:
• “iTP Secure WebServer System Requirements” (page 34)
• “Preparing Your System for the iTP Secure WebServer” (page 35)
• “Event Management Service (EMS) Template Installation” (page 37)
• “Installing and Configuring the iTP Secure WebServer” (page 38)
• “Verifying the Configuration” (page 44)
• “The Ninety-Day Test Certificate” (page 45)
• “Test-starting the Administration Server and the iTP Secure WebServer” (page 46)
• “If You Plan to Use TLS or SSL Encryption” (page 46)
• “If You Are Using the Nonsecure Version” (page 46)
iTP Secure WebServer System Requirements
The iTP Secure WebServer runs on a variety of NonStop systems and is supported by standard
NonStop subsystems and local area network (LAN) controllers.
Supported NonStop Systems
The iTP Secure WebServersupports NS-series (Integrity servers and BladeSystem servers).
Required and Optional Software
These HP NonStop product versions are required for using the iTP Secure WebServer:
• NonStop operating system version J06.10 or later J-series RVUs and H06.21 or later H-series
RVUs. For information about installing the NonStop operating system, see the INSTALL User's
Guide or the DSM/SCM User's Guide.
• Open System Services (OSS) file system. For information on creating an OSS environment,
see the Open System Services Installation Guide.
• TCP/IP, including the Sockets library and SCF. The IP addresses of both the iTP Secure
WebServer and the NonStop system must be registered on the Domain Name Server (DNS)
of your LAN.
For information about installing and configuring TCP/IP and DNS, see the TCP/IP Configuration
and Management Manual.
For information about installing and configuring TCP/IPv6, see the TCP/IPv6 Configuration
and Management Manual.
For information about installing and configuring IP CIP, see the Cluster I/O Protocols (CIP)
Configuration and Management Manual.
• NonStop TS/MP subsystem, with PATHMON and Pathsend features. For information on installing
and configuring this subsystem, see the TS/MP System Management Manual.
• NonStop SQL/MP H01, including TSQLEXE, TSQLCAT, TSQLUTI, TSQLFIL, and TSQLMSG.
This product is required only if you will be using the Resource Locator Service (RLS).
34 Installing the iTP Secure WebServer