iTP Secure WebServer System Administrators Guide (Version 7.5+)

: cd /usr/tandem/webserver/TnnnnHnn_DDMMMYY_SPR_Hnnn_nn/admin/conf : ./install.EMS
The install.EMS script moves the template file to the proper NonStop directory, and merges
the template file with the system template. Use of install.EMS requires the Guardian CTOEDIT
program (part of the T8373 C run-time Library) to function properly.
The EMS template installation can take up to five minutes to complete.
The script displays the number of errors and warnings and terminates on an error. If an error
occurs, you can check the files LWEBDDL, LWEBTMPL, LTEMPLI, and LCOUP for more information.
If the iTP Secure WebServer is already running when you install the templates, the change in the
presentation of event messages takes effect immediately; you need not restart the server.
Installing and Configuring the iTP Secure WebServer
When you install the iTP Secure WebServer, you also install:
• The iTP Secure WebServer Administration Server, which you can use later to do these:
Modify configuration files◦
◦ Start, restart, and stop the server environment
◦ Display event messages.
• Secure Transport.
• The Resource Locator Service (RLS) if you have previously built the file rmt.pway.
To install the iTP Secure WebServer and give it a basic configuration that you can use for testing,
use the procedure in 'Before You Begin the Installation'. You can make custom changes to the
configuration file later, but the basic configuration enables you to start the server and test it (if you
made all the preparations described earlier).
The procedure for installing the software depends on the distribution medium for the product. Check
the Readme.txt file if you have received the software on a CD. Check the softdoc before you
install the product. These installation instructions are correct as of the time this manual was published.
However, the Readme.txt file or softdoc supersedes the information here.
Before You Begin the Installation
• Review the readme file on the product CD to make sure you have the correct version for all
products installed or to be installed on your system.
• Make sure your site meets the minimum hardware and software requirements, as indicated
in the IPSetup User's Guide on the product CD.
• Make sure you know the directory path in which to install your iTP Secure WebServer. (The
default install directory is /usr/tandem/webserver/.)
• If you have not used the IPSetup program before, review the IPSetup User's Guide on the
product CD for information about this installation utility. The file is USRGUIDE.PDF on the
CD.
• If you are upgrading from a previous iTP Secure WebServer, you must be logged on as the
same user ID that originally installed iTP Secure WebServer before you run ./setup under
“Running the Setup Script” (page 40).
Beginning the Installation
The installation program, ./setup, is implemented in korn shell scripts. All options in the setup
program have default values. Press the enter key to accept the default values during the installation
process.
38 Installing the iTP Secure WebServer