L700 (CTL700) Installation and User's Guide (G06.28+, H06.04+, J06.03+)

Contents
L700 (CTL700) Installation and User’s Guide—527338-008
ii
4. Controls and Indicators on the CTL700 Tape
Library
SCSI Control Connection 3-7
Connecting the Tape Library Power Cable 3-10
Routing the Power Cable 3-10
Connecting Power 3-11
Terminate the SCSI Bus 3-12
After Installation Is Complete 3-12
4. Controls and Indicators on the CTL700 Tape Library
Operator Panel 4-1
Indicators 4-3
Buttons 4-3
Display Screens 4-3
Operations Overview
4-12
Tape Library Power Switch
4-13
Tape Drive Power Switches 4-15
5. Configuring and Testing the Tape Library
Overview of Configuration 5-1
Tape Library Capacity 5-1
Entering Configuration Data 5-3
Using the Operator Panel 5-3
Providing Configuration Information 5-3
Setting Screen Characteristics 5-7
Setting Cleaning Cartridge Information 5-8
Entering Tape Drive Information 5-9
Verifying Configuration 5-10
Performing the Final Steps 5-11
Initialization Sequence 5-11
Initialize and Calibrate Mechanisms 5-11
Vision Calibration
5-12
Hand Assembly Testing
5-12
Audit
5-12
Tape Drive Targeting
5-13
Audit Drive Targeting 5-13
Testing the Tape Library 5-13
Installing Diagnostic and Cleaning Cartridges
5-14
Running Diagnostic Tests
5-16
Loading Tapes Into the Tape Library 5-18
Placing the Tape Library Online 5-19