L700 (CTL700) Installation and User's Guide (G06.28+, H06.04+, J06.03+)

Controls and Indicators on the CTL700 Tape Library
L700 (CTL700) Installation and User’s Guide—527338-008
4-7
Display Screens
Cleaning Information
Accessible from the Main menu, the Cleaning Info menu provides information about
cleaning and controls the tape library’s cleaning cartridges. It enables you to change
the warning count for each type of cleaning cartridge.
The Cleaning Info menu enables you to change the warning count for each type of
cleaning cartridge. The menu also lets you check the number of times a cleaning
cartridge has been used.
Diagnostics Tests
Accessible from the Main menu, the Main Diagnostics menu lets you perform these
tests:
•
Tape drive-related tests:
°
Clean Drive: Lets you clean the tape drives.
°
Mount: Loads test tape cartridges from a tape drive.
°
Dismount: Unloads test tape cartridges from a tape drive.
°
Mount-Dismount Loop: Loads and unloads test tape cartridges from a tape
drive. You can designate the number of times the tape library goes through the
loop.
•
Get-put loop: Gets a diagnostics tape cartridge and returns it to the same location.
The user can designate the number of times the tape library goes through the loop.
•
Demo mode: Simulates tape library operation.
Note. All diagnostics tests except Clean Drive require the tape library and associated tape
drive to be offline.