L700 (CTL700) Installation and User's Guide (G06.28+, H06.04+, J06.03+)
Table Of Contents
- Title Page
- Contents
- What's New
- About This Manual
- 1 Overview of the Tape Library
- 2 Unpacking the Tape Library
- 3 Installing the Tape Library
- 4 Controls and Indicators on the CTL700 Tape Library
- 5 Configuring and Testing the Tape Library
- Overview of Configuration
- Tape Library Capacity
- Entering Configuration Data
- Performing the Final Steps
- Initialization Sequence
- Testing the Tape Library
- 6 Operating the Tape Library
- Operating in Automated Mode
- Powering Off the Tape Library
- Operating In Manual Mode
- 7 Tape Drives in the CTL700 Tape Library
- 8 Configuring the CTL700 Tape Library for the NonStop SSeries Server
- 9 Managing Tape Drives
- A Configuring the CTL700 Tape Library for the NonStop NS-Series Server
- B Configuring the CTL700 Tape Library for the NonStop SSeries Server With the IOAM Enclosure
- C Configuring the CTL700 Tape Library for the NonStop BladeSystem Server
- Safety and Compliance
- Index
Contents
L700 (CTL700) Installation and User’s Guide—527338-008
v
Tables
Figure 3-1. Theta Stops 3-2
Figure 3-2. Array Lock Removal and Replacement 3-4
Figure 3-3. Unpacking the Expansion Frame 3-5
Figure 3-4. Attaching the Expansion Frame 3-6
Figure 3-5. Tape Library Power Cable 3-11
Figure 4-1. Operator Panel Display, Control, and Indicators 4-2
Figure 4-2. Library Status Screen 4-4
Figure 4-3. FSC Log Screen 4-5
Figure 4-4. CAP Status Screen 4-5
Figure 4-5. Drive Information Menu 4-6
Figure 4-6. Main Diagnostics Menu 4-8
Figure 4-7. Version Info Menu 4-8
Figure 4-8. Configuration Menu 4-9
Figure 4-9. Library Configuration Menu 4-9
Figure 4-10. Drive Configuration Menu 4-11
Figure 4-11. Display Information Menu 4-12
Figure 4-12. Library Power Switch Location 4-14
Figure 4-13. Tape Drive Power Switch Location 4-15
Figure 5-1. Tape Library Capacity Map - Two Tape Drive Columns 5-2
Figure 5-2. CT9841FC-1 Cartridge 5-14
Figure 5-3. Reserved Cells 5-15
Figure 5-4. Placing Tape Cartridge Into the Tape Cartridge Array Cells 5-18
Figure 5-5. Loading the CAP with a Tape Cartridge 5-19
Figure 6-1. Removing the CAP Magazine 6-5
Figure 6-2. Opening the Access Doors 6-10
Figure 6-3. Extending the Gripper 6-12
Figure 6-4.
Removing the Cartridge From the Hand 6-13
Figure 6-5. Loading a Tape Cartridge Into a Tape Drive 6-14
Figure A-1.
Fibre Channel Router Rear View A-2
Figure A-2.
View of Column 1 A-3
Figure A-3.
Main Menu A-4
Figure A-4.
Drive Info A-5
Figure A-5.
Drive Information A-6
Figure A-6.
WWN Drive Info A-7
Figure A-7.
Example of a CTL700 Tape Library Connected to a NonStop NS-Series
Server A-9
Figure A-8.
Location of the CTL7FC Fibre Channel Interface Card Inside the
CTL700 Tape Library A-10
Tables