L700 (CTL700) Installation and User's Guide (G06.28+, H06.04+, J06.03+)
Table Of Contents
- Title Page
- Contents
- What's New
- About This Manual
- 1 Overview of the Tape Library
- 2 Unpacking the Tape Library
- 3 Installing the Tape Library
- 4 Controls and Indicators on the CTL700 Tape Library
- 5 Configuring and Testing the Tape Library
- Overview of Configuration
- Tape Library Capacity
- Entering Configuration Data
- Performing the Final Steps
- Initialization Sequence
- Testing the Tape Library
- 6 Operating the Tape Library
- Operating in Automated Mode
- Powering Off the Tape Library
- Operating In Manual Mode
- 7 Tape Drives in the CTL700 Tape Library
- 8 Configuring the CTL700 Tape Library for the NonStop SSeries Server
- 9 Managing Tape Drives
- A Configuring the CTL700 Tape Library for the NonStop NS-Series Server
- B Configuring the CTL700 Tape Library for the NonStop SSeries Server With the IOAM Enclosure
- C Configuring the CTL700 Tape Library for the NonStop BladeSystem Server
- Safety and Compliance
- Index
L700 (CTL700) Installation and User’s Guide—527338-008
vii
What’s New in This Manual
Manual Information
L700 (CTL700) Installation and User’s Guide
Abstract
This manual describes how to install and use a CTL700 tape library on HP NonStop S-
series servers and HP Integrity NonStop NS-series servers.
Product Version
N.A.
Supported Release Version Updates (RVUs)
This publication supports J06.04 and all subsequent J-series RVUs, H06.15 and all
subsequent H-series RVUs, and G06.32 and all subsequent G-series RVUs until
otherwise indicated by its replacement publication.
Document History
New and Changed Information
This manual has new information about the new N1530A (LTO-3 SCSI) tape drive.
Part Number Published
527338-008 July 2008
Part Number Product Version Published
527338-003 N.A. October 2004
527338-004 N.A. July 2005
527338-005 N.A. February 2006
527338-006 N.A. February 2006
527338-008 N.A. July 2008