ld Manual

ld Diagnostic Messages
ld Manual—529650.001
3-45
Nonfatal Errors
Effect. ld continues but a loadfile will not be created.
Recovery. Delete one of the two conflicting Import Controls.
Cause. ld encountered an oversize value for the indicated command.
Effect. ld continues but a loadfile will not be created.
Recovery. Correct the invalid value.
Cause. ld encountered an undersize value for the indicated command.
Effect. ld continues but a loadfile will not be created.
Recovery. Correct the invalid value.
Cause. ld encountered more than one procedure with the MAIN attribute and the -
allow_multiple_mains command has not been specified.
Effect. ld continues but a loadfile will not be created.
Recovery. Either eliminate the multiple MAIN attributes or specify the -
allow_multiple_mains command.
Cause. ld, in processing a -strip or -change command, could not read the indicated
file.
Effect. ld continues but a loadfile will not be created.
Recovery. Check the file to ensure that it is a valid PIC loadfile. If so, call HP.
**** ERROR **** [20186]:
Overflow detected in the attribute for option 'name name'.
**** ERROR **** [20187]:
Underflow detected in the attribute for option 'name name'.
**** ERROR **** [20188]:
More than one procedure has the MAIN attribute.
**** ERROR **** [20192]:
I/O Error: Failed to load Minimal file header from file name.
**** ERROR **** [20193]:
I/O Error: Failed to load Program Header section from file
name.